Tools, Flashlights & Books

Tools, Flashlights & Books

  • How to use:

    • The underside of the SolderM8 is equipped with a special suction cup-like adhesive that will stick to flat or textured surfaces at every angle, even upside down.
    • Simply secure your LED strip wires by clipping them to the device, and then dab solder on the newly jointed wires to form a bond. Then repeat the process as needed.
  • Features:

    • Compact, lightweight and durable
    • Made from aircraft aluminum
    • Multi-purpose - works for eye-bolt and T-handle
    • Fits industry-standard ground clamps
    • Fits common 1/2 inch drive socket wrenches
    • Allows ground clamps to be quickly, easily, and more securely installed in hard-to-get-to places versus screwdrivers or channel-lock pliers
    • Provides proper leverage on short T-handles
  • Features:

    • Weight: 18 lbs.
    • For use on 5/8" and 1/2" Ground Rods. 43 3/4 in. long.
    • No more dragging hydraulic lines.
    • High quality materials.
    • Drive flush or below grade.
    • No ladder, no kneeling.
    • One person operation.
    • Safe, quick and effective.
    • Made in the U.S.A.
  • Features:

    • Made in USA
    • Can be used with adjustable wrench, tongue and groove pliers, box wrench, and 3/8 drive ratchet.
    • Ratchet not included
  • Features

    • Mathematical Formulas
    • National Electrical Code tables
    • Wiring Configurations
    • Conduit Bending
    • Ampacity
    • Conduit Fill Information
    • Life-saving First Aid Procedures
  • Features:

    • Made of hardened steel.
    • Includes a handy nail puller and pry bar for multi-purpose use.
    • Ruler for quick on the job measurements.
    • Use as a quick carpenter's square.
    • Holds staples in tight spots with built in slots.
    • Open your beer at the end of the day.
  • Features:

    • Rare Earth magnetic with 27 pounds of pull.
    • No batteries required.
    • Detects screws or nails in wood frame walls.
  • Features:

    • Light source: LED.
    • Batteries 3 x AAA (included).
    • Max output 120 Lumen 5W.
    • Aluminum.
    • Run time 2.5 hours.
    • Adjustable.
    • Strobe Function
  • Features:

    • CREE LED 300 Lumen.
    • Li-ion Battery.
    • Aluminum Alloy. Recharge Time 2-3 Hours
  • Features:

    • No tape measure
    • No level required
  • Features:

    • Protects expensive and fragile cables.
    • Protects ceiling from twisting and marring.
    • Smooth interior creates an almost frictionless chase.
    • Middle slit allows for easy cable removal or addition at any time.
    • Fits 1" standard ceiling grid.
  • Features:

    • Made with reinforced, high density, non-conductive, UV protected, light-weight durable orange polypropylene plastic.
    • Fits square or rounded 90 degree corners.
    • 2 removable partition walls allow you to keep your tools separated and organized.
    • Built in handle for easy transport. Magnetic tray for fasteners, connectors, etc.
  • Features:

    • Glow in the dark handles.
    • Ergonomic handle design for maximum comfort.
    • Compact design.
    • Strip 8 - 22 AWG.
    • 8-32 and 6-32 bolt cutters.
    • Large cutting blades for easy general purpose cuts.
    • Needle nose tips.
  • Features:

    • Needle nose tips.
    • NMSC stripper at the nose where it is easier to use inside boxes.
    • Strips conductor sizes from #10 down to #22 AWG (for telephone wire).
    • Large cutting blades for easy general purpose cuts.
    • Barrel sleeve crimper near the pivot.
    • Ergonomic "hourglass" shaped handles for comfort and speed.
    • Glow in the dark handles!
  • Features:

    • Bulb: COB LED
    • Run Time: 5 hours
    • Max Output: 150 Lumens
  • Features:

    • CNC milled from 6061 aluminum extra large "VD" groove, straddles up to 10" diameter.
    • Rare Earth magnets for extra holding.
    • Water and shock resistant.
  • Features:

    • Easy to attach.
    • Adapter clips included.
    • Works with most fiberglass, aluminum and wood step ladders.
  • Features:

    • Solid brass construction.
    • Convenient on/off switch.
    • Factory aligned laser module calibrated to precise 0.15 accuracy.
    • Magnetic damping for quick stabilization.
    • Self leveling and aligning (vertically).
    • Durable plastic carry case. Battery included.
  • Features:

    • Can measure up to 80M (262Ft)
    • Bilateral or single laser distance measurer
    • Record data to your smartphone through Bluetooth 4.0 in real time
    • Measurement units: mm, cm, m, square m, cubed m, in, ft, square ft, yd, square yd, cubed yd
    • Batteries: 2 AAA
    • Accurate to: 3mm
  • Features

    • Pullout bit cartridge handle makes it easy to find, change and store bits
    • Tamperproof bit cartridge
    • Shaft opening serves as a 1/4" hex nut driver
    • Handle is made from engineered nylon/ABS resin
    • Alloy steel shaft
  • Features

    • Pullout bit cartridge handle makes it easy to find, change and store bits
    • Tamperproof bit cartridge
    • Shaft opening serves as a 1/4" hex nut driver
    • Handle is made from engineered nylon/ABS resin
    • Alloy steel shaft
  • Features:

    • Fast, Easy Installation.
    • Prevents sore fingers and cramping hands.
    • Fits all brands; yellow, tan, red, grey & blue.
  • Features:

    • Kit removes knockouts on Electrical, Security, Alarm, and Datacom Panels.
    • Works with lipped and non-lipped panels.

Go to Top